Sky+ HD Remote Codes

Sky+ HD Remote Codes Listed below are the known codes for Sky HD remotes, if you can not find your model or manufacturer, try the codes listed on the Sky+ codes page, they may work. Before the remote control can operate the TV it must be programmed, a 3 or 4 digit code can be entered to select the correct IR command set, held in the remote control’s memory. The database stored in the remote control holds codes for around 90% of TV manufacturers, and some manufacturer’s share the same code.

3 Digit Code Programming
Press “TV”, then “select” + “red” (hold for 2 seconds) then the three-digit remote code, then press the “power” button to see if it operates your TV, if not repeat the functions and trial of codes until it does, once you have found the correct number write it down now test the other functions of the TV it may be that you still haven’t got the right code.

4 Digit Code Programming
All individual codes stored for each manufacturer are identified by a 3 digit code which is listed below. The easiest way to set up the remote is to input the 3 digit code for the TV receiver if it is available. If the 3 digit code is not known then an additional facility allows you to input a 4 digit manufacturer’s code which then allows you to step through all codes held for that manufacturer until the correct code is identified.